|
|
|
Color LED Wash
INTELLA has introduced the innovative technology of Storm 300 RGBWA and Storm 300 RGBWA waterproof, with IP44 & IP65 suitable for outdoor use. Come in a very small and robust chassis weighing only 8 kilos/17 lbs.
The 24 lenses in Storm 300 with RGBWA colors contain a stunning color calibrate function, what generates a wide-ranging color and effect combinations.
Storm 300 contains 24 high power 12W RGBWA 5 in1 LEDs, and has an astonishing light output of 10,000 lumen – 1,250 lumen per kilo. The compact design ensures easy and quick setup. |
|
|
请稍候...
-
Storm 300 RGBWA IP65
TECHNICAL INFORMATION
Optics
-
Light source: 24 x High power 12W RGBWA (16bit) 5 in1 LEDs
-
LEDs expected lifetime: 50,000 hours*
-
Lens options: 25°
Photometric
-
Light output: 10,000 lumen (25° lens)
-
Light output: 15,000 lux at 2 meters
-
Efficacy: 50 lm/W
Electrical
-
AC Power nominal: 100 – 240V 50/60 Hz
-
AC Power max rating 100 – 240V 50/60 Hz
-
Maximum power consumption: 250 W (all LEDs on)
-
Typical current consumption: 200 W (all LEDs on)
-
Power factor: 5A0.98 PF (230V)
Programming and Control
-
Protocol: USITT DMX512 A
-
Setting and addressing: Standalone, Master/Slave, Auto Mode
-
DMX channels: 4, 6 & 9 selectable for numerous applications
Physical
-
Dimensions (L x H x W): 490 x 285 x 105mm (19.3 x 11.22 x 4.13 in)
-
Weight: 9.05 Kg (19.95 lbs)
-
Material: Die-casting Aluminum
-
Lens: PE and tempered glass
-
IP class (waterproof): IP44 / IP65
Installation
-
Orientation: Any
-
Rigging possibilities: Floor stand (included) or hanging (Omega Clamp included)
-
Safety features: Bottom mount for Safety wire
Thermal
-
Temperature range, Operating: -10° to +40°C (14° - 104°F)
-
Humidity (max.): 98%
-
Safety features: Active, forced air, temperature-regulated, low noise
Connections
-
DMX data in/out (indoor version): IP65 Neutrik HD locking XLR 5-pin cable 0.5m, for DMX in and out
-
Screened cables in compliance with EIA RS-485 specifications: 2 conductors plus screen, 120 Ohm impedance, max. transmission 250kBaud.
-
Power cable 1m with bare ends
Conforms to
-
Certifications CE and RoHS2
-
Waterproof grade: IP44 / IP65
Included Items
-
1 x Base Plate /2 x Mounting Brackets
-
A sweet Safety Cable & eyebolt
-
A power Cord
-
User Manual
Features and Accessories
-
Built-in over heat protection temperature sensor to extend the lamp life
-
16-bit dimmer
-
DMX-controlled operation or stand alone operation with Master/Slave-function
-
Color calibrate function
-
4-button easy to use LCD control panel menu
-
Aluminum mounting bracket with locking knobs + base plate
-
3-pin DMX Input/Output
-
PowerCon™ compatible AC power In/Out connectors
-
DMX-512 connection with DMX terminator, XLR plug with 120 OHM resistor connected between pins 2 and 3 plugged into the output XLR socket of the last fixture in the chain (when DMX cable has to run a long distance in an electrically noisy environment)
*(Figure provided by manufacture and obtained under manufacture`s test conditions)
|
|
|
|
|
|
|