Storm 1000 white IP65

TECHNICAL INFORMATION

Optics

             Light source: 1,260 x White LEDs

             Luminous: 100,000 LM

             LEDs expected lifetime: 50,000 hours*

             Lens options: 120 degrees fixed

Features

             Pan/Tilt: 0° / 120°

             LED Panel: 9 individual controllable segments

Electrical

             AC Power: 200 – 240V 50/60 Hz

             Maximum power consumption: 1000 W

             Typical current consumption: 5A

             Peak current consumption: 5A

Programming and Control

             Protocol: USITT DMX512

             Setting and addressing: Standalone, Master/Slave, Auto Mode

             DMX channels: 1, 3, 4, 6, 7, 9, 16

Physical

             Dimensions (L x H x W): 490 x 285 x 120 mm (19.3 x 11.22 x 4.72 in)

             Material: Die-casting Aluminum

             Lens: Tempered glass front

Installation

            Orientation: Any

            Rigging possibilities: Floor stand (included) or hanging (Omega Clamp included)

            Safety features: Bottom mount for Safety wire

            Material: Die-casting Aluminum

            Lens: Tempered glass front

Thermal

            Temperature range, Operating: -10° to +40°C (14° - 104°F)

            Humidity (max.): 90%

            Safety features: Passive

 Connections

            DMX data in/out: IP43 Neutrik HD locking XLR 5-pin cable 0.5m, for DMX in and out

           Power cable 1.5m with bare ends

Conforms to

            Certifications CE and RoHS

Included Items

            1 x Base Plate /2 x Mounting Brackets

            A sweet Safety Cable & eyebolt

            A power Cord

            User Manual

Features and Accessories

            Intense built-in strobe programs + random strobe

            3/9-segment pixel modes can safely be used as wash (max 40% brightness)

            Built-in over heat protection temperature sensor to extend the lamp life

            Variable electronic strobe & 16-bit dimmer

            User adjustable flash rate of 0-30 flashes per second

            Flash duration can be set from 0-650ms in DMX mode

            7000Hz LED scan rate

            4-button easy to use LCD control panel menu

            Aluminum mounting bracket with locking knobs + base plate

            3-pin & 5-pin DMX Input/Output

            PowerCon™ compatible AC power In/Out connectors

*(Figure provided by manufacture and obtained under manufacture`s test conditions)