Storm 300B and Storm 300B waterproof
Color LED Wash
INTELLA designed the amazing Storm 300B, that contains 44 x RGBW 4in1 6W LEDs, a power consumption of 260W and an astonishing light output of 12,000 luminous. The compact design ensures easy and quick setup.
Storm 300B, an IP65 rated fixture - suitable for outdoor use, come in a very small and robust chassis weighing only 9 kilos/19 lbs with a compact dimension of 490 x 285 x 105mm (19.3 x 11.22 x 4.13 in). The indoor model has IP43 class.
The 44 lenses in Storm 300B colors contain a stunning color calibrate function; what generates a wide-ranging color and effect combinations, while the LED source life expectancy is 50,000 hours. The Color LED Wash has lens options of 35° and DMX channels 1, 3, 4, 5, 10, 14 & 15 selectable for numerous applications.
Important features of Storm 300B: built-in over heat protection temperature sensor to extend the lamp life, standard 3-pin XLR for DMX in/out, color calibrate function and 4-button easy to use LCD control panel menu.
Appreciate video address:
storm300B
Minoo 3:30:03 PM
https://www.youtube.com/watch?v=b8_OsE7w65E
TECHNICAL INFORMATION
Optics
Light source: 44 x RGBW 4in1 6W LEDs
LEDs expected lifetime: 50,000 hours*
Light output: 12,000 lm (35° lens)
Interchangeable lens options: 35° fixed
Features
Pan/Tilt: 0° / 120°
Electrical
AC Power nominal: 100 – 240V 50/60 Hz
AC Power max rating 100 – 240V 50/60 Hz
Maximum power consumption: 260 W (all LEDs on)
Programming and Control
Protocol: USITT DMX512 A
Setting and addressing: Standalone, Master/Slave, Auto Mode
DMX channels: 1, 3, 4, 5, 10, 14 & 15 selectable for numerous applications
Physical
Dimensions (L x H x W): 490 x 285 x 105mm (19.3 x 11.22 x 4.13 in)
Weight: 9.05 Kg (19.95 lbs)
Material: Die-casting Aluminum
Lens: PE and tempered glass
IP class (waterproof): IP43 / IP65 selectable
Installation
Orientation: Any
Rigging possibilities: Floor stand (included) or hanging (Omega Clamp included)
Safety features: Bottom mount for Safety wire
Thermal
Temperature range, Operating: -10° to +40°C (14° - 104°F)
Humidity (max.): 98%
Safety features: Active, forced air, temperature-regulated, low noise
Connections
DMX data in/out (indoor version): IP65 Neutrik HD locking XLR 3-pin connectors, for DMX in and out
Screened cables in compliance with EIA RS-485 specifications: 2 conductors plus screen, 120 Ohm impedance, max.
transmission 250kBaud.
Power cable 1m with bare ends
Conforms to
Certifications CE and RoHS2
Waterproof grade: IP43 / IP65
Included Items
1 x Base Plate /2 x Mounting Brackets
A sweet Safety Cable & eyebolt
A power Cord
User Manual
Features and Accessories
Built-in over heat protection temperature sensor to extend the lamp life
16-bit dimmer
DMX-controlled operation or stand alone operation with Master/Slave-function
Color calibrate function
4-button easy to use LCD control panel menu
Aluminum mounting bracket with locking knobs + base plate
3-pin DMX Input/Output
PowerCon™ compatible AC power In/Out connectors
DMX-512 connection with DMX terminator, XLR plug with 120 OHM resistor connected between pins 2 and 3 plugged into
the output XLR socket of the last fixture in the chain (when DMX cable has to run a long distance in an electrically noisy
environment)
*(Figure provided by manufacture and obtained under manufacture`s test conditions)
|