TECHNICAL INFORMATION

Optics

  Light source: 44 x RGBW 4in1 6W LEDs
  LEDs expected lifetime: 50,000 hours*
  Light output: 12,000 lm (35° lens)
  Interchangeable lens options: 35° fixed

Features

  Pan/Tilt: 0° / 120°

Electrical

  AC Power nominal: 100 – 240V 50/60 Hz
  AC Power max rating 100 – 240V 50/60 Hz
  Maximum power consumption: 260 W (all LEDs on)

Programming and Control

  Protocol: USITT DMX512 A
  Setting and addressing: Standalone, Master/Slave, Auto Mode
  DMX channels: 1, 3, 4, 5, 10, 14 & 15 selectable for numerous applications

Physical

  Dimensions (L x H x W): 490 x 285 x 105mm (19.3 x 11.22 x 4.13 in)
  Weight: 9.05 Kg (19.95 lbs)
  Material: Die-casting Aluminum
  Lens: PE and tempered glass
  IP class (waterproof): IP43 / IP65 selectable

Installation

  Orientation: Any
  Rigging possibilities: Floor stand (included) or hanging (Omega Clamp included)
  Safety features: Bottom mount for Safety wire

Thermal

  Temperature range, Operating: -10° to +40°C (14° - 104°F)
  Humidity (max.): 98%
  Safety features: Active, forced air, temperature-regulated, low noise

Connections

  DMX data in/out (indoor version): IP65 Neutrik HD locking XLR 3-pin connectors, for DMX in and out
  Screened cables in compliance with EIA RS-485 specifications: 2 conductors plus screen, 120 Ohm impedance, max. 

  transmission 250kBaud.
  Power cable 1m with bare ends

Conforms to

  Certifications CE and RoHS2
  Waterproof grade: IP43 / IP65

Included Items

  1 x Base Plate /2 x Mounting Brackets
  A sweet Safety Cable & eyebolt
  A power Cord
  User Manual

Features and Accessories

  Built-in over heat protection temperature sensor to extend the lamp life
  16-bit dimmer
  DMX-controlled operation or stand alone operation with Master/Slave-function
  Color calibrate function
  4-button easy to use LCD control panel menu
  Aluminum mounting bracket with locking knobs + base plate
  3-pin DMX Input/Output
  PowerCon™ compatible AC power In/Out connectors
  DMX-512 connection with DMX terminator, XLR plug with 120 OHM resistor connected between pins 2 and 3 plugged into  

  the output XLR socket of the last fixture in the chain (when DMX cable has to run a long distance in an electrically noisy  

  environment)

*(Figure provided by manufacture and obtained under manufacture`s test conditions)